Juniper SRX Series Manual page 246

To DTE: CTS: up, DCD: up, DSR: up
From DTE: DTR: up, RTS: up
DCE loopback override: Off
Clocking mode: internal
Loopback: none
Tx clock: non-invert
Line encoding: nrz
Packet Forwarding Engine configuration:
Destination slot: 4
CoS information:
Direction : Output
CoS transmit queue
Limit
0 best-effort
none
3 network-control
none
4. Assign the interface an IP address:
[edit]
user@host# set interfacesinterface-nameunit 0 family inet addressinterface address/destination prefix
5. Add or select a security zone:
[edit]
user@host# set security zones security-zonezone-name interfacesinterface-namehost-inbound-traffic
system-services all
6. Add or select security zones for host inbound traffic protocol options:
[edit]
user@host# set security zones security-zonezone-nameinterfacesinterface-name host-inbound-traffic
protocols all
7. Set security policies:
[edit]
user@host# set security policiespolicy-name
RELATED DOCUMENTATION
Bandwidth
% bps
95 7600000
5 400000
Buffer Priority
% usec
95 0
5 0
228
low
low