Juniper SRX Series Manual page 27

Services gateways for the branch physical interface modules
Hide thumbs Also See for SRX Series:
Table of Contents

Advertisement

Table 5: SRX Series Services Gateway GPIM/XPIM Model Numbers (continued)
GPIM or XPIM
2-Port 10-Gigabit Ethernet XPIM
8-Port Gigabit Ethernet SFP XPIM
16-Port Gigabit Ethernet XPIM
16-Port Gigabit Ethernet XPIM (with PoE)
24-Port Gigabit Ethernet XPIM
24-Port Gigabit Ethernet XPIM (with PoE)
Figure 1 on page 9
shows how the slots on the front panel of the SRX550 Services Gateway are numbered.
Slots 1 and 2 are for Mini-PIMs, and slots 3 through 8 are for GPIMs.
Figure 1: SRX550 Services Gateway Slot Numbers
1
Figure 2 on page 9
shows how the slots on the front panel of the SRX650 Services Gateway are numbered.
Slots 1 through 8 are for GPIMs.
Figure 2: SRX650 Services Gateway Slot Numbers
650
NOTE:
Only the SRX650 Services Gateway supports hot-swappable functionality for GPIMs.
Because the services gateway GPIMs communicate with the backplane at various performance
levels, you must install them in the correct slots.
Figure 3 on page
10,
Figure 4 on page
services gateway GPIMs.
7
5
2
7
5
3
1
10, and
Figure 5 on page 10
Model Number
SRX-GP-2XE-SFPP-TX
SRX-GP-8SFP
SRX-GP-16GE
SRX-GP-16GE-POE
SRX-GP-24GE
SRX-GP-24GE-POE
8
6
4
3
8
6
4
2
show the three form factors for the
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srx550Srx650Srx220Srx240Srx 210

Table of Contents