Juniper SRX Series Manual page 245

root@srx-650-a> show interfaces se-4/0/* terse
Interface
se-4/0/0
se-4/0/1
se-4/0/2
se-4/0/3
se-4/0/4
se-4/0/5
se-4/0/6
se-4/0/7
The following sample output shows extensive details of se-4/0/0 on the interface:
root@srx-650-a> show interfaces se-4/0/0 extensive Physical interface: se-4/0/0,
Enabled, Physical link is Up
Interface index: 150, SNMP ifIndex: 773, Generation: 177
Type: Serial, Link-level type: PPP, MTU: 1504, Maximum speed: 8mbps
Device flags : Present Running
Interface flags: Point-To-Point Internal: 0x0
Link flags : Keepalives
Hold-times : Up 0 ms, Down 0 ms
CoS queues : 8 supported, 8 maximum usable queues
Last flapped : 2012-03-01 11:07:13 PST (10:57:02 ago)
Statistics last cleared: Never
Traffic statistics:
Input bytes :
Output bytes :
Input packets:
Output packets:
Input errors:
Errors: 3, Drops: 0, Framing errors: 3, Runts: 0, Giants: 0,
Policed discards: 0, Resource errors: 0
Output errors:
Carrier transitions: 1, Errors: 0, Drops: 0, MTU errors: 0,
Resource errors: 0
Serial media information:
Line protocol: eia530a
Resync history:
Sync loss count: 0
Data signal:
Rx Clock: OK
Control signals:
Local mode: DCE
Admin Link Proto
up up
up up
up up
up up
up up
up up
up up
up up
0
0
0
0
Local
0 bps
0 bps
0 pps
0 pps
227
Remote