Removing And Installing Driver Side Footwell Vents - Volkswagen Passat 2011 Workshop Manual

– Guide vents into tabs of trim -arrows-.
– Lightly tighten bolts -1-.
– Check function of controls -1-.
If OK:
– Tighten bolts -1- to 1.5 Nm.
If not:
– Loosen bolts -1-, and align vents until controls function prop‐
erly.
– Tighten bolts -1- to 1.5 Nm.
– Install rear centre console trim ⇒ General body repairs, inte‐
rior; Rep. gr. 68 ; Centre console; Assembly overview - centre
console .
6.5 Removing and installing driver side foot‐
well vents
Special tools and workshop equipment required
Passat 2011 ➤ , Passat Variant 2011 ➤
Heating, air conditioner - Edition 06.2017
99
6. Air duct