Liability Statement - Vision Engraving & Routing Systems 1212 Operating Manual

Copyright 1998 Vision Computerized Engraving & Routing Systems Copyright 1998 Vision Computerized Engraving & Routing Systems Copyright 1998 Vision Computerized Engraving & Routing Systems Copyright 1998 Vision Computerized Engraving & Routing Systems Copyright 1998 Vision Computerized Engraving & Routing Systems
(A Division of W (A Division of W estern Engravers Supply estern Engravers Supply
(A Division of W (A Division of W (A Division of Western Engravers Supply estern Engravers Supply estern Engravers Supply, Inc.)
All Rights Reserved All Rights Reserved All Rights Reserved All Rights Reserved All Rights Reserved
This publication is protected by copyright, and all rights are reserved. No part of this manual may be reproduced or
transmitted by any means or in any form, without prior written consent from Vision.
Limits of Liability / Disclaimer of W Limits of Liability / Disclaimer of W Limits of Liability / Disclaimer of War ar ar ar arranty for this T Limits of Liability / Disclaimer of W Limits of Liability / Disclaimer of W
The information contained within this manual has been carefully checked and is believed to be accurate, however,
Vision makes no representations or warranties for this manual, and assumes no responsibility for inaccuracies, errors,
or omissions that may be contained within this manual. In no event shall Vision be liable for any loss of profit
including (but not limited to) direct, indirect, special, incidental, consequential, or other damages resulting from any
defect or omission in this manual, even if previously advised of the possibility of such damages.
In the interest of continued product development, Vision reserves the right to make improvements to this manual
and the products it describes at any time, without notice or obligation.
Vision Computerized Engraving and Routing Systems W Vision Computerized Engraving and Routing Systems War ar ar ar arranty F Vision Computerized Engraving and Routing Systems W
Vision Computerized Engraving and Routing Systems W Vision Computerized Engraving and Routing Systems W
Vision Computerized Engraving and Routing Systems warrants that for a period of one (1) year from the date of
delivery to the user of the Vision table, that the table will be free from defects in material and workmanship under
normal use and service. It is specifically understood that this warranty covers normal use only and shall be null and
void in the event that the Vision table is altered or modified by the user without authorization, or is subject to abuse,
neglect, or other misuse by the user. The spindle is covered by a ninety-day (90) warranty. Other equipment may
be purchased which is not included in this warranty, and may have a separate manufacturer's warranty, which
applies. Other items considered "consumable", are not covered and are excluded from any and all warranties.
Specifically these items include spindle motor brushes, spindle belts, lubricant, and cutters furnished with the table.
In the event a defect is discovered during the warranty period, the user shall contact Vision Computerized Engraving
and Routing Systems for instructions regarding resolution of the problem. Vision Computerized Engraving and
Routing Systems shall at its option, replace the Vision table or correct the defect or problem by repair at Vision's
manufacturing facility or at one of its authorized field service offices. In the event of either replacement or repair,
Vision Computerized Engraving and Routing Systems shall be liable only for the cost of repairs, including parts and
labor. Any incidental costs, including the cost of shipment from the user's location to the point of repair, and
subsequent return, shall be at the expense of the user. Vision Computerized Engraving and Routing Systems shall
have no further liability hereunder. Vision Computerized Engraving and Routing Systems shall have no obligation or
liability to repair or replace, during the warranty period, those items that form a part of the Vision table and are
considered expendable by design, including but not limited to, cutters, spindle motor brushes, and spindle belts.
The above and foregoing is the only warranty of any kind, either express or implied, including but not limited to any
warranties of merchantability and fitness for a particular purpose, made by Vision Computerized Engraving and
Routing Systems on the Vision table. Any warranties expressed by law are hereby expressly disclaimed. No oral or
written information, advice, or other communications given by Vision Computerized Engraving and Routing Systems,
its dealers, distributors, agents, or employees shall create a warranty or in any way increase the scope of this war-
ranty. Neither Vision Computerized Engraving and Routing Systems nor anyone who has ever been involved in the
creation, production, or delivery of the Vision table shall be liable for any direct, indirect, consequential, or inciden-
tal damages (including but not limited to damages for loss of business profits, business interruption, loss of business
information, and the like) arising out of the use or inability to use this product.
Any software supplied by Vision Computerized Engraving and Routing Systems in conjunction with the purchase of
the Vision Engraving table, for use therewith, shall be governed by its own separate software license and warranty
agreement.
Page 2
, Inc.) , Inc.)
, Inc.) , Inc.)
ranty for this Table Manual: ranty for this T ranty for this T ranty for this T able Manual: able Manual: able Manual: able Manual:
ranty F ranty For The Vision T ranty F
ranty F
or The Vision T or The Vision Table: or The Vision T able: able: able:
or The Vision T able: