Parameters Setting - KStar YDC9300-B Operation Manual

12. Alarm Code
If has battery charging, above 2-13 interface windows will also display the charging status at
the same time as below:
Charging
Status
3) Pressing "scroll" button, you may circulate all messages from the first one to the last one then
returns back to the first one and vice versa.
4) All alarm codes are present when abnormal behavior(s) occur(s).

4.4 Parameters setting

The setting function is controlled by 3 buttons (, OFF, ON) : ---goes into the setting page and
value adjustment; OFF---for exit setting; ---for choosing different pages.
After the UPS turn ON, press buttons "" & "OFF" for 2 seconds and then goes into the setting
interface page.
Boost Floating
25