Appendix 1 Specifications - KStar YDC9300-B Operation Manual

Model
Capacity
Rated Voltage
Voltage Range
Frequency Range
Power Factor
Input
Current THDi
Bypass Voltage Range
Generator Input
Rated Voltage
Power Factor
Voltage Regulation
Output Frequency
Crest Factor
Power factor
Efficiency
Voltage
Battery
Charge
Current(A)
Transfer Time
Overload
Protection
Short Circuit
Overheat
Battery Low

Appendix 1 Specifications

Phase
Max. voltage: 220Vac: +25%(optional +10%,+15%,+20% )
Min. voltage: -45% (optional -10%, -20%, -30%)
Frequency protection range: ±10%
Phase
Utility Mode ±1%, ±2%, ±4%, ±5%, ±10% of the rated frequency(optional)
Battery Mode
THD
±120Vdc(20pcs9AH)
Standard
(20pcs7AH;2x20pcs
unit
7/9AH optional)
±96/108/120Vdc (16~20 pcs, 16 pcs define, Standard unit
and 20 pcs no power derating; 18 pcs output power factor
Long run
unit
±192/204/216/228/240Vdc(32/34/36/38/40pcs optional)
Standard unit
Long run
unit
charge current can be set according to battery capacity installed
Load≤110%: last 60min change to bypass, ≤125%: last
AC Mode 10min, change to bypass, ≤150%: last 1min change to
Load≤110%: last 10min, ≤125%: last 1min, ≤150%: last
Bat. Mode
Bypass Mode Breaker 64A
Line Mode: Switch to Bypass; Backup Mode: Shut down UPS
10k (S/H)
10kVA
10kW
380/400/415Vac,(3Ph+N+PE)
220/230/240Vac,(L+N+PE)
380/400/415Vac
220/230/240Vac
208~478Vac
120~276Vac
≤3%(100% non linear load)
230Vac: +20%(optional +10%,+15% )
240Vac: +15%(optional +10% )
220/230/240Vac,(L+N+PE)
220/230/240Vac
(50/60±0.1%)Hz
≤2% with linear load
≤5% with non linear load
Up to 94.5%
0.9; 16 pcs output power factor 0.8;)
1.35A
14A max.
Utility to Battery : 0ms; Utility to bypass: 0ms
bypass, >150% change to bypass immediately
5S, >150% shut down UPS immediately
Breaker 100A
150A peak 270A peak
immediately
Alarm and Switch off
37
15k (S/H) 20k (S/H)
15kVA
15kW
40-70Hz
≥0.99
Support
1.0
±1%
3:1
1.0
±120Vdc(2x20pcs 9AH)
(2x20pcs 7AH optional)
Optional:
2.7A
16A max. 18A max.
Breaker 126A
300A peak
20kVA
20kW