Festo CPX-E-EP Translation Of The Original Instructions page 34

Parameterisation
Attribute no. Access
9 Get/Set
10 Get/Set
11 Get/Set
12 Get/Set
13 Get/Set
34
Description
Monitoring (default: active)
Bit 0:
2)
0 = SCS monitoring Inactive
1 = SCS monitoring 2) Active
Bit 1:
3)
0 = SCO monitoring Inactive
3)
1 = SCO monitoring Active
Bit 2:
0 = monitoring U inactive
OUT
1 = monitoring U active
OUT
Bit 3:
0 = monitoring U inactive
VAL
1 = monitoring U active
VAL
Bit 4:
4)
0 = SCV monitoring Inactive
1 = SCV monitoring 4) Active
Bit 5 7: Reserved
...
Fail safe mode (bit 0, 1)
0 = Reset all outputs (default)
1 = Retain signal status
2 = Assume Fail safe mode
Force mode (bit 2, 3)
0 = Force mode blocked
1 = Force mode enabled
System idle mode (bit 4, 5)
0 = Reset all outputs (default)
1 = Retain signal status
2 = Assume idle mode
System start (bit 6)
0 = System start with standard paramet-
ers (factory setting) and current expan-
sion; external parameterisation possible
(default)
1 = System start with saved parameters
and saved expansion; parameters and
expansion are saved to retentive memory;
Type Function
number
USINT 4401 (bit
0 7)
...
USINT 4402 (bit 0,
1)
USINT 4402 (bit 2,
3)
USINT 4402 (bit 4,
5)
USINT 4402 (bit 6)
Festo — CPX-E-EP — 2020-01a