Festo CPX-E-EP Translation Of The Original Instructions page 61

Technical Data
General technical data
Module identification
Degree of protection in accord-
ance with EN 60529
Protection against electric shock
(Protection against direct and
indirect contact in accordance
with IEC 60204-1)
Electromagnetic compatibility
Assigned address space (inputs/outputs)
Without diagnostics
With status bits
With I/O diagnostics
interface
1) not including linking element
2) Including linking element
3) for non-conforming technical data see UL operating conditions table UL
Tab. 72 General Technical Data
Power supply
Operating power sup-
ply U
EL/SEN
Intrinsic current con-
sumption at nominal
operating voltage 24 V
from U
EL/SEN
Reverse polarity pro-
tection 24 V U
EL/SEN
against 0 V U
EL/SEN
Mains buffering time
Tab. 73 Power Supply
Network-specific Data
Protocol
Specification
Transmission rate
Crossover detection
Festo — CPX-E-EP — 2020-01a
E-EP
IP20
The degree of protection is not UL-tested.
through the use of PELV circuits (protected extra-low voltage)
to EN 61000-6-2/-4 and NE 21
[bit] /
– –
[bit] 8/
–
[bit] 16/16
[V DC] 24 25%
_
[mA] 70
Yes
[ms] 20
EtherNet/IP, Modbus TCP
EtherNet/IP
[Mbps] 10/100 (full duplex/half duplex)
Auto-MDI/MDI-X
1)
61