2-Post Mid Mount Rail Assembly; 2-Post Mid Mount Rail - Blue Coat ProxySG 900 Series Maintenance And Upgrade Manual

Slide Rail Kit

2-Post Mid Mount Rail Assembly

The mid mount installation requires two Rail_B brackets to be installed onto the equipment
rack (per side). The Rail_B brackets support the appliance, while the front bracket (Rail_A)
secures the appliance.
To install the mounting brackets onto the equipment rail:
1. Install two Rail_B mounting brackets onto the equipment rail.

Note: The rack screws used in this step are not included with the slide rail kit as they are
rack-specific. See your equipment rack installation guide for more information on screw
sizing.
a. Install the front Rail_B bracket with the mounting surface facing towards the rear
using (2) rack screws. Do not fully tighten! The Rail_B bracket will be tightened after
the appliance is secured into the rack.
b. Install the rear Rail_B bracket with the mounting surface facing towards the front
using (2) rack screws. Do not fully tighten! The Rail_B bracket will be tightened after
the appliance is secured in the rack.
c. Repeat for the other side. Verify the Rail_B mounting brackets are at the same height
in the rack
96 ProxySG 900 Series Maintenance & Upgrade Guide