Power Supply Unit
Identifying a Faulty Power Supply Unit (ProxySG only)
Follow these steps to identify a faulty hard disk:
1.
Check for a faulty power supply:
a.
Log in to the appliance:
https://ip_address:8082
where
ip_address
b.
In the Management Console, navigate to Maintenance > System and Disks >
Environment.
c.
Click the View Sensors button to display a table that shows power supply status.
d. Identify the power supply that should be replaced:
44
is the IP address assigned to the appliance.
ProxySG 900 Series Maintenance & Upgrade Guide