Verifying HDD Installation
You can verify that you installed the disk drive correctly by reviewing information in the
Management Console or the CLI:
If you are using:
• Management Console—See "Using the Management Console to Verify Disk Drive
Installation" on page 41.
• CLI—See "Using the CLI to Verify Disk Drive Installation" on page 42.
Using the Management Console to Verify Disk Drive Installation
The following procedure describes how to use the Management Console to verify disk drive
hot-swapping.
1.
Enter the appliance URL and log in to the Management Console.
Maintenance
2.
Select
Disks
3.
Select the
Disks
The
tab lists the total number of installed disk drives. Verify that the number of
installed disk drives matches the number physically installed in the appliance.
ProxySG 900 Series Maintenance & Upgrade Guide
System and Disks
>
tab.
.
Hard Disk Drive
41