Replacing The 10G 2-Port Option Card Bracket - Blue Coat ProxySG 900 Series Maintenance And Upgrade Manual

Replacing the 10G 2-port Option Card Bracket

The 2-port fiber optic 10 Gigabit ethernet option cards come prefitted with a standard full-
height PCI bracket. This bracket is not compatible with the ProxySG 900 appliance. To install
the option card into your appliance, you will need to replace the existing bracket with one of
the included, appliance-specific brackets.
To replace the standard full-profile bracket with the included ProxySG 900 bracket (425-
08816):
1. Carefully remove two (2) bracket screws from the option card.

Note: Be careful when removing the bracket screws from the option card. Scratches or
nicks on the circuit board can destroy the card!
ProxySG 900 Series Maintenance & Upgrade Guide
*The option card is in the upside down position.
LAN Option Card
69