Prepare The Appliance; "Prepare The Appliance; Slide Rail Disassembly - Blue Coat ProxySG 900 Series Maintenance And Upgrade Manual

Slide Rail Kit

Prepare the Appliance

This procedure describes how to remove the inner slide from the slide rail assembly and
mount onto the appliance. The inn rail assembly comes preinstalled into Rail_A from the
factory to reduce packaging space.

Slide Rail Disassembly

The slide rail kit comes with the inner rail preattached to Rail_A and must be disassembled
before continuing with the installation.
To remove the inner rail from Rail_A:
1. Fully extend the slide rail by pulling out the inner rail until it reaches the stops.
2. Activate the white one-way slide release latch (located towards the rear of the inner rail)
and then remove the inner rail.

Note: The slide rails are symmetrical in design. All slide rail components can be used
interchangeably with the opposite slide rail.
92 ProxySG 900 Series Maintenance & Upgrade Guide