Hard Disk Drive; Pre-Installation Checklist - Blue Coat ProxySG 900 Series Maintenance And Upgrade Manual

This section describes how to replace the HDD (hard disk drive) assembly in a ProxySG 900
Series appliance.
If you are replacing a HDD for your ProxySG 900 appliance, start at "Take the Faulty Hard Disk
Offline" on page 37. If you are upgrading your appliance, start with "ProxySG 900 Upgrade Kit"
on page 36.

Note: The HDDs are hot-swappable; you can remove, replace, or add HDDs while the
appliance remains powered on.

Pre-Installation Checklist

Item
Tools Required
Components Supplied
Other Required Components
Safety Notices
The image below shows the location of the ProxySG 900 appliance drive bays:
ProxySG 900 Series Maintenance & Upgrade Guide

Hard Disk Drive

Description
None
Hard disk assembly
None
See "Safety Warnings and Cautions" on page 8.
●
Put on an electrostatic discharge (ESD) strap before opening the appliance.
●
35