This section describes how to install the slide rail kit for the ProxySG 900 series into a variety
of equipment racks.
Pre-Installation Checklist
Item
Tools
Components Supplied
Safety Notices
ProxySG 900 Series Maintenance & Upgrade Guide
Slide Rail Kit
Description
#2 Phillips head screwdriver
8mm wrench (or an adjustable wrench)
Equipment rack specific mounting hardware (refer to your equipment rack guide for more
information)
Marker Pen (optional)
Mechanical lift (optional)
Slide Rail Kit, consisting of the following components:
(2) Pre-assembled slide rails (each Rail_A assembly has the inner rail preinstalled)
(2) Rail_C bracket
(4) Rail_D bracket
Hardware pack
(10) M3 T-Type
■
(8) M6 screw
■
(8) M6 cage nut
■
See "Safety Warnings and Cautions" on page 8.
●
The Blue Coat ProxySG 900 series appliances are heavy and require at least (1)
●
additional person to assist the technician during final installation, if a mechanical lift is
not used.
87