Replacing The Power Supply Unit - Blue Coat ProxySG 900 Series Maintenance And Upgrade Manual

Replacing the Power Supply Unit

To replace a power supply unit in a ProxySG 900 Series appliance:
1. Disconnect the power cord from the power supply unit that needs to be replaced. Unplug
the power cord from the AC power outlet and then from the appliance.
2. Depress the latch (A) and pull handle (B) to remove the power supply from the appliance.
3. Insert the new power supply into the appliance until it is fully seated; the latch will lock
into place with an audible click.
4. Connect a power cord between the new power supply and a power source.
Tip: For higher reliability, connect each power supply to a separate circuit.
e
ProxySG 900 Series Maintenance & Upgrade Guide
Power Supply Unit
45