Verify The Slide Rail Installation; "Verify The Slide Rail Installation - Blue Coat ProxySG 900 Series Maintenance And Upgrade Manual

Verify the Slide Rail Installation

These steps describe how to verify that the Blue Coat ProxySG 900 series slide rail kit has been
properly installed.
To verify proper slide rail installation:
1. Inspect the slide rails to verify that there is no damage to or debris in the rails.
2. Verify that the rails are even and installed on the same level in the equipment rack.
3. With the appliance installed into the equipment rack, push and pull the system to verify
smooth movement across the entire range of motion.

Note: If you experience difficulty sliding the appliance fully into the equipment rack in a
4 post installation, your equipment rack rails might be out of spec. See "Slide rail sizing
information" on page -102 for more information.
4. With the appliance installed, carefully pull out the appliance to verify slide-stop
functionality.
5. With the appliance installed and locked into place with the captive screw, verify that the
appliance is securely installed.
ProxySG 900 Series Maintenance & Upgrade Guide
Slide Rail Kit
101