Installing An Option Card - Blue Coat ProxySG 900 Series Maintenance And Upgrade Manual

Installing an option card

To install an upgrade option card in a ProxySG 900 Series appliance:
1. Power down the appliance and disconnect the power cord(s). Unplug the power cord(s)
from the AC power outlet and then from the appliance.
2. Unlock the shipping latch on the appliance by pulling the blue latch towards the front of
the appliance.
3. Open the center cover.
a. Slide both center panel latches simultaneously towards the front of the appliance.
b. While holding the latches in the open position, flip open the center panel.
ProxySG 900 Series Maintenance & Upgrade Guide
LAN Option Card
71