Installing A Hard Disk Drive (Hdd) Assembly - Blue Coat ProxySG 900 Series Maintenance And Upgrade Manual

Hard Disk Drive

Installing a Hard Disk Drive (HDD) Assembly

1. Properly orientate the new HDD carrier with the chassis HDD bay and slide into the
appliance until it reaches the chassis stops.

Note: Do not insert the HDD carrier with the latch in the closed position; instead, push the
HDD carrier body.
2. After the drive is in place, secure the drive by closing the latch until it clicks into place.
Verify that the drive is flush with the face of the appliance.
3. Verify that the HDD LED turns green after you install the replacement drive.
4. Close the bezel.
40 ProxySG 900 Series Maintenance & Upgrade Guide