Kyocera ECOSYS M2135dn Service Manual page 44

(7) Default (LCD model)
Before using this machine, configure such settings as date and time, network configuration, and energy saving functions
as needed.
NOTE
The default settings of the machine can be changed in System Menu.
Refer to the operation guide of the main unit about the items which can set from the system menu.
(7-1) Setting Date and Time
Follow the steps below to set the local date and time at the place of installation.
When you send an E-mail using the transmission function, the date and time as set here will be printed in the header of
the E-mail message. Set the date, time and time difference from GMT of the region where the machine is used.
If the user administration is effective, this can be changed by logging in with administrator privileges.
If the user login administration is not effective, the user authentication screen appears. Enter a login user name and
password, and select [Login].
The default login user name and login password at the factory shipment is set as below.
Login User Name: 4000 or 3500
Login Password: 4000 or 3500
Before setting date/time, make sure to set the time difference.
The correct time can be periodically set by obtaining the time from the network time server.
1. Displays the screen.
[System menu / counter] key > [▲][▼] key > [Common Setting] > [OK] key > [▲][▼] key >
[Day and Time setting] > [OK] key
2. Configure the settings.
[▲][▼] key > [Time difference] > [OK] key > Select the time difference > [OK] key > [▲][▼] key > [Date/Time] >
[OK] key > Set day and time > [OK] key > [▲][▼] key > [Date format] > [OK] key >
Select the date format > [OK] key
Time Zone
Date/Time
Date Format
NOTE
Select [▲] or [▼] key, and enter the numerical values.
If you select [◄] or [►] key, the entering position moves left and right and the highlight is displayed.
Item
Set the time difference from GMT. Choose the nearest listed location from
the list. If you select a region that utilizes summer time, configure settings
for summer time.
Set the date and time for the location where you use the machine. If you
perform Send as E-mail, the date and time set here will be displayed on the
header.
Value: Year (2000 to 2037), Month (1 to 12), Day (1 to 31), hour (00 to 23),
Minute (00 to 59), Second (00 to 59)
Select the display format of year, month, and date. The year is displayed in
Western notation.
Value: Month/Day/Year, Day/Month/Year, Year/Month/Day
2S0/2S1/2S2/2S3/2S4/2S5/2SG/2SH/3RA
Descriptions
2-13