Kyocera ECOSYS M2135dn Service Manual page 352

U699 Software switch: Set
(Message: Set: Soft SW)
Contents
Sets the software switches on the FAX PWB individually.
Purpose
Change the setting when a problem such as split output of received originals occurs
* :Since the communication performance is largely affected, normally this setting need not be
changed.
Method
1.Press the [Start] key.
2.Select [SW No.].
3.Enter the desired software switch number (3 digits) using the numeric keys and press the
[Start] key.
Items
SW No.
4.Press the keys of bit 0 to 7 to switch each bit between 0 and 1.
Items
Bit
5.Press the [Start] key to set the setting value.
* :"Completed" is displayed.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
List of software switches which can be configured
Communication control procedures
No.
36
37
38
Specifies the software switch number (2 to 3 digits)
Set the software switch bit (8bit).
Bit
7654 Coding format in transmission
3210 Coding format in reception
5 33600bps/V34
4 31200bps/V34
3 28800bps/V34
2 26400bps/V34
1 24000bps/V34
0 21600bps/V34
7 19200bps/V34
6 16800bps/V34
5 14400bps/V34
4 12000bps/V34
3 9600bps/V34
2 7200bps/V34
1 4800bps/V34
0 2400bps/V34
6-97
2S0/2S1/2S2/2S3/2S4/2S5/2SG/2SH/3RA
Contents
Contents
Contents