(4-4)Replacing the language sheet (LCD model)
Procedures
1. Open the document processor.
2. While lifting up the leading edge, slide
three points of the operation covers (b)
in the direction of the arrow.
3. Detach the operation panel cover (b)
from the operational section (a).
4. Detach the clear panel (b) from the
operation panel (a).
5. Next detach the operation panel sheet
(c).
6. Replace the operation panel sheet of
the applicable language.
7. Reattach the parts in the original posi-
tion.
2S0/2S1/2S2/2S3/2S4/2S5/2SG/2SH/3RA
b
a
Figure 4-172
a
Figure 4-173
4-92
b
b
b
c