14. Release three hooks (b) at the rear side
of the right cover (a).
15. Tilt the right cover (a) and detach it.
16. Remove the screw(M3×8Ptight) (b) and
three screws(M3×8Stight)(c) securing
the low voltage power source PWB
cover (a) .
17. Remove the low voltage power source
PWB cover (a).
Attention: When detaching the low voltage
power source PWB, the lower voltage
power source PWB protection plate (d) may
fall.
2S0/2S1/2S2/2S3/2S4/2S5/2SG/2SH/3RA
a
Figure 4-93
d
b
c
Figure 4-94
4-52
b
a