Kyocera ECOSYS M2135dn Service Manual page 278

U034 Paper timing adjustment
(Message: Adj Paper Timing)
Contents
Adjust the leading edge registration or center line.
Purpose
Executed if there is a regular error between the leading edges of the copy image and original.
Adjusted if there is a regular error between the center lines of the copy image and original.
Method
1.Press the [Start] key.
2.Select the item to adjust.
* :The screen for adjusting is displayed.
Items
LSU Out Top
LSU Out Left
Adjustment: LSU Out Top
1.Select the item to adjust.
2.Press the [System Menu] key.
3.Press the [Start] key to output a test pattern.
4.Press the [System Menu] key.
Items
Top
MPT
Cass
Dup
5.Press the [◄] [►] keys or the numeric keys to change the counter value.
For the test pattern 1, increase the setting value.
For the test pattern 2, decrease the setting value.
* :When the setting value is increased, the image moves backward, and it moves forward
when the setting value is decreased.
Center line
(within ± 1.0 mm)
Leading edge registration.
Adjusts the center line
Contents
Adjust the reference value of the leading-
edge timing.
Adjust the leading-edge timing for the MP
tray
Adjust the leading-edge timing for cas-
sette feed
Adjust the leading-edge timing when
copying in duplex.
A
Correct image
Figure 6-5
2S0/2S1/2S2/2S3/2S4/2S5/2SG/2SH/3RA
Contents
Setting range
0 to 1180
-70 to 70
-70 to 70
-70 to 70
A
Output
example 1
6-23
Initial Data
setting varia-
tion
600 0.1mm
0 0.1mm
0 0.1mm
0 0.1mm
A
Output
example 2