History Messages - Alcatel-Lucent OmniPCX Office Manual

Chapter
6
Type Message
239 STORAGE MEMORY
CHANGED OR LOST
242 ERROR ON OPENING
VOICE PROMPT FILE
243 ERROR ON CLOSING
VOICE PROMPT FILE
244 ERROR ON READING
VOICE PROMPT FILE
245 ERROR ON WRITING
VOICE PROMPT FILE
246 ERROR ON OPENING
VOICE PROMPT FILE
247 ERROR ON OPENING
VOICE PROMPT FILE
248 DISCHARGED BATTERY
OR BATTERY REPLACE-
MENT
This results in an incorrect
date/time
249
6.4

History messages

The events identified by the codes in the system history messages table concern modifications
to the system hardware configuration (appearance/disappearance of boards or terminals,
refusal of a board on exceeding equipment limits) or other events (reset execution, buffer fill
rate attained, etc).
When the table is full, a new event is stored in place of the oldest message.
This table is only emptied in the event of a cold system reset.
28/62
Location Additional Information
CPU (80) INFO 0 = type of error
- 0 : medium KO
- 1 : medium full
- 2 : checksum error
- 3 : system file control error
INFO 1 = type of medium
- 0 : NAND FLASH CPU
- 2 : HARD DISK
INFO 2 = type of initial medium
INFO 3 = affected memory area
(metering, alarms, voice prompts, etc)
CPU (80) INFO 0 to 3 = type and value of voice
prompt
CPU (80) INFO 0 to 3 = type and value of voice
prompt
CPU (80) INFO 0 to 3 = type and value of voice
prompt
CPU (80) INFO 0 to 3 = type and value of voice
prompt
CPU (80) INFO 0 to 3 = type and value of voice
prompt
CPU (80) INFO 0 to 3 = type and value of voice
prompt
CPU (80)
Action