Alcatel-Lucent OmniPCX Office Manual page 39

Type Message
162 THRESHOLD METERING TA-
BLE
The critical threshold (80 % by
default) of the data metering
buffer has been reached
163 THRESHOLD URGENT TABLE
The critical threshold (80 % by
default) of the urgent alarms ta-
ble has been reached
164 HARDWARE TABLE FULL
The hardware anomaly table is
full
165 HISTORY TABLE FULL
The history event table is full
166 METERING TABLE FULL
The metering table is full
167 URGENT TABLE FULL
The urgent alarms table is full
168 NMC CONNECTION START
The NMC application has estab-
lished a connection with the
PCX
169 NMC CONNECTION END
The NMC application has ended
the connection with the PCX
170 NMC NOT ALLOWED CALL
NMC call by analog XRA (not
allowed)
171 NMC ERRONEOUS CALL
The PCX tried to establish a call
to an NMC but it was erroneous
172 NMC NON ANSWERED CALL
The PCX tried to establish a call
to an NMC, but the call was not
answered
173 NMC INFO TIMEOUT
The PCX connected to an NMC
and sent an INFO message
saying that an urgent alarm
should be read. The PCX did
not respond to this message.
174 NMC PUT DATA TIMEOUT
The PCX received no acknow-
ledgement for the data sent in
the message. The communica-
tion failed.
Location Additional Information
CPU (80)
CPU (80)
CPU (80)
CPU (80)
CPU (80) INFO 0 = Origin (1 byte); 0 = Ac-
count ticket table; 1 = VoIP RTP
ticket table
CPU (80)
CPU (80)
CPU (80)
CPU (80)
CPU (80)
CPU (80)
CPU (80)
CPU (80)
Action
39/62