Alcatel-Lucent OmniPCX Office Manual page 20

Chapter
4
On dialing the ASR-Replace code in the new IP Phone, it requests the EDN and then
password of the existing IP Phone. On successful replacement:
- The New IP Phone is assigned with the existing sets EDN and other properties
- The previous IP Phone with default configuration is deleted
The OMC must be configured to enable the Noteworthy addressASRRep_IP.
To activate this feature:
From the OMC -> System Miscellaneous -> Memory Read/Write -> Other Labels
Enable Noteworthy addressASRRep_IP
Set to TRUE (01)
Note 1:
By default the Noteworthy address ASRRep_IP is set to FALSE (00)
After a Cold reset default parameters (00) are restored.
When the OMC is configured in this way, more than 100 sets can be configured
Example:
Replace
Phone 50 has been configured earlier. And now a new IP Phone is connected to the LAN. This
Phone is automatically taken into account by the system with a default configuration and is
operational.
The phone number 150 is automatically allocated to this phone. The Automatic Set
Relocation Replace service is invoked from the newly connected IP Phone 150 (target) to
retrieve the configuration of phone 50 (source):
<ASR-Replace-code><Source-EDN>< source phone password>
Phone 150 is reset and has the same configuration as set 50 and the previous set is deleted.
Note 2:
Under normal conditions default passwords are not allowed for set relocation services. If the Noteworthy
addressASRRep_IP service is enabled, a default password can be used.
20/62