Alcatel-Lucent OmniPCX Office Manual page 42

Hide thumbs Also See for OmniPCX Office:
Table of Contents

Advertisement

Chapter
6
Type Message
229
NO MORE TSC IP DYN AD-
DRESS
TSC/IP phone cannot be initial-
ized due to a DHCP problem
230
EXTERNAL GATEKEEPER
REJECTED
240
NO VOICE MESSAGE AVAIL-
ABLE
Anomaly sent at the init if the
BIOS does not detect the whole
RAM.
241
VMU MEMORY THRESHOLD
The voice message recording
memory area is nearly full.
250
STARTUP SCRIPT
Anomaly sent when an error in
the Linux startup script occurs.
251
R_NOE_DLD_SUCCESS
Alcatel-Lucent 9 series down-
loading successful.
252
R_ANO_NOE_DLD_FAIL
Alcatel-Lucent 9 series down-
loading unsuccessful.
253
R_SWL_SOON_EXPIRED
Indicates that the Software Li-
cence expires in 30 days
255
R_BUSY_TRUNK_CALL_FAIL
ED
An outgoing call could not be
set up because the trunk group
was overloaded.
6.5
Information displayed
The information given below concerns the hardware messages as well as those contained in
the system history.
42/62
Location
Additional Information
CPU (80)
INFO 0 = number of megabytes of
DRAM detected by the BIOS.
CPU (80)
INFO 0 = 1 (ON) if there are just a
few minutes of recording time left; 0
(OFF) end of the anomaly.
CPU (80)
INFO 0 = Error line / 256
INFO 1 = Error line mod. 256
INFO 2 = Critical error
INFO 3 = Status
CPU (80)
INFO 0 = Device type
INFO 1 = Files downloaded: one bit
for each kind of file.
Board loca-
INFO 0 = Device type
tion.
INFO 1 = Phase of failure
Interface
INFO 2 = Reason of failure
marker
INFO 3 = Files downloaded failure
CPU(80)
INFO 0 to INFO 3: displays the
trunk group information. Exception:
comp info: FF FF FF FF No trunk
group no. is available (Error in con-
figuration).
Action
Increase the
number of IP
addresses in
the DHCP
server range
(this address
range must
be greater
than or equal
to the number
of IP Enablers
to be in-
stalled).
contact the in-
staller to get a
new licence

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents