Alcatel-Lucent OmniPCX Office Manual page 30

Chapter
6
Type Message
6 AUTOMATIC DATA SAVING
BACKUP REFUSED
MMC session was active
7 LAUNCH OF DATA RESTORE
Data Saving
8 DATA RESTORE OK
9 DATA RESTORE FAILED
10 DATA SAVING REFUSED
No data saving option
11 END OF START-UP
The system is operational
20 NOT ENOUGH MEMORY
Available space < 15 %
21 FULL BUFFER MESSAGE
22 FLOW CONTROL ON
MEMORY POOLS
Alert level size of memory alloc-
ated to flow control on a
memory reached
30 DBMS CRASH
31 CURRENCY CONVERSION
32 PRIORITY CALL
34 SOFTWARE KEY CHANGE
30/62
Location Additional Information
CPU (80)
CPU (80)
CPU (80)
CPU (80)
CPU (80)
CPU (80)
CPU (80) INFO 0 = type of pool
Board loca- INFO 0 = type of pool
tion INFO 1 = level (95 = exceeded 95
% threshold; 75 = gone under 75 %
threshold)
CPU (80) INFO 0 to 3 = causes of crash
CPU (80) INFO 0 =1: conversion OK
CPU (80) INFO 0 = Directory Number High
Byte, INFO 1 =Directory Number
Low Byte
CPU (80) INFO 0 = type of key (0= main key;
1 = CTI key)
INFO 1 = type of event (see Inform-
ation Displayed / Software key
states)
INFO 2 and 3 = Bytes correspond-
ing to the acknowledgement code
(respectively High and Low)
Action
End the MMC
session. Save
manually or
wait for the
next automat-
ic save.
Check if the
hardware
configuration
has been
changed
since the last
backup
Check if the
hardware
configuration
has been
changed
since the last
backup