Oki Data CONFIDENTIAL
5.6.2 Notes on SU board/Scanner Unit replacement
Set the Scanner parameter when replacing the SU board/Scanner Unit :
Before replacing the SU board/Scanner Unit, try to get the scanner setting
parameters from the board by using tthe SU board/Scanner Unit replacement
function of Maintenance Utility, if it is still able to be accessed by Maintenance Utility.
After replacing the SU board/Scanner Unit to new one, restore the scanner setting
parameters to new one by using Maintenance Utility. For further information, refer
the instruction of the manual of Maintenance Utility.
44952001TH Rev.2
5. MAINTENANCE MENUS
5-35