Oki MC362w Maintenance Manual page 212

Oki Data CONFIDENTIAL
PJL Status
No. Category
Code
7 Warning 10979 1 Fuser Unit Near Life
2
3
4
5 Please see Help for details.
8 Warning 10978 1 Belt Unit Near Life
2
3
4
5 Please see Help for details.
9 Warning 10091 1 Please change Fuser Unit.
2
3
4
5 Please see Help for details.
10 Warning 10080 1 Please change Belt Unit.
2
3
4
5 Please see Help for details.
44952001TH Rev.2
Error Warning Description
Notifies the fuser unit is
near its life.
Moreover, when set
as "Admin Setup"-
"Management"-"System
Setup"-"Near Life
LED"=Disable, Alarm
LED is switched off.
%COLOR%
Y
M
C
K
*In FX750, there is not
%COLOR% information
because 4 image drum
unit is one body model.
Notifies the belt unit is
near its life. This is a
warning; thus, printing will
not stop.
Moreover, when set
as "Admin Setup"-
"Management"-"System
Setup"-"Near Life
LED"=Disable, Alarm
LED is switched off.
Notifies the life of the
fuser unit (warning).
This appears when the
cover was opened and
closed just after the fuser
life error occurred.
Notifies the life of the belt
unit (warning).
This appears when the
cover was opened and
closed just after the belt
life error occurred.
PJL Status
No. Category Error Warning
Code
11 Warning 10966 (Y) 1 %COLOR% Toner Empty
10967 (M) 2
10968 (C) 3
10965 (K) 4
5 Please see Help for details.
12 Warning 10939 (Y) 1 %COLOR% Toner Cartridge not
10940 (M) 2 installed.
10941 (C) 3
10938 (K) 4
5
Please see Help for details.
13 Warning 10970 (Y) 1 Please install new Image Drum
10971 (M) 2 Unit.
10972 (C) 3
10969 (K) 4
5
Please see Help for details.
14 Warning 10053 1 Belt Reflex Error
2
3
4
5
7. TROUBLESHOOTING PROCEDURES
Description
Notifies the toner is
empty. This is a warning
only.
This appears when the
cover was opened and
closed just after the toner
empty error occurred.
%COLOR%
Y
M
C
K
Notifies the toner
cartridge is not installed.
This is a warning only.
%COLOR%
Y
M
C
K
Notifies the life of the
drum. This is a warning
only.
This appears when the
cover was opened and
closed just after the drum
life error occurred.
Belt Reflex Check Error.
PU firmware does not
notify this warning to
CU firmware at the
time of Shipping Mode.
Therefore, this status
does not occur in a user
environment.
7-20