Oki MC362w Maintenance Manual page 314

Oki Data CONFIDENTIAL
Note 1: Only MC562
*1 : Network factory defaults: "Admin Setting" - "Network Menu" - "Reset to factory
defaults"
: It is executed to reset only network settings to the factory defaults make settings
again due to unsuccessful network access.
*2 : SD Card initialization: "Admin Setting" - "Management" - "SD Memory Card Setup"
- "Initialize"
*3 : SD Card format: "Admin Setting" - "Management" - "SD Memory Card Setup" -
"Format"
*4 : SD Card data erasing: "Admin Setting" - "Management" - "Storage Maintenance
Setup" - "Erase SD Memory Card"
: It is not executable when Job Accounting is operating.
: Users must execute this menu with "Erase Privacy Data" before disposing of the
device to prevent personal information from leaking. Instead of the said timing,
users must execute this menu when disposing of SD cards after replacement.
*5 : FLASH initialization: "Admin Setting" - "Management" - "Flash Memory Setup" -
"Initialize"
*6 : Language initialization: "Admin Setting" - "Management" - "Language Maintenance
Setup" - "Initialize"
: This menu is executed when users want to delete downloaded language data and
reset the display language back to English temporarily.
*7 : Reset Settings: "Admin Setting" - "Management" - "Reset Settings"
displayed in MPS mode.
: This menu is executed to reset the device settings (including network settings)
back to the defaults temporarily and make settings again when device operation is
unstable, etc.
*8 : Erase Privacy Data: "Admin Setting" - "User Install" - "Erase Privacy Data":
displayed in MPS mode or when Job Accounting is operating.
: Users must execute this menu with "SD Cared data erasing" before disposing of
the device to prevent personal information from leaking.
*9 : Main counter reset："AdminSetting" - "Management" - "Print Statistics" - "Reset
Main Counter"
*10 : Main counter reset："AdminSetting" - "Management" - "Print Statistics" - "Reset
Supplies Counter"
*11 : Job log deletion: "Admin Setting" - "Management" - "Job log deletion"
: This menu is executed when users want to delete only the usage history of the
device.
44952001TH Rev.2
*12 : SD Card format: "Service Menu" - "System Maintenance" - "Format SD Card"
*13 : Format Flash ROM: "Service Menu" - "System Maintenance" - "Format Flash
ROM" * Not displayed in MPS mode.
*14 : Reset Admin Password: "Service Menu" - "System Maintenance" - "Reset Admin
Password"
: This menu is used to initialize only the administrator password by support when
users forget the administrator password.
*15 : ALL RESET: "Service Menu" - "System Maintenance" - "ALL RESET"
displayed in MPS mode.
: This menu must be executed to delete customer information before dealers etc.
lend devices to the next customers.
*16 : OKIUSER change: "Service Menu" - "System Maintenance" - "OKIUSER"
displayed in MPS mode.
*17 : Country code change: "Service Menu" - "Fax Maintenance" - "Country Code"
*18 : Settings are initialized when their defaults are changed due to changes in
destinations or country codes.
*19 : Only "Email edit fixed phrase" under "Scanner Setup" - "Mail Setup" is initialized.
*20 : When the destination setting is changed from an option for Japan (such as "JP1"
and "JPOEM") to an option for outside Japan (such as "ODA"), entries in Japanese
are cleared.
If a profile name is in Japanese, parameters except strings are also initialized at
* Not
the same time.
*21 : Unassigned
*22 : Unassigned
*23 : No means is provided to change the setting of the print statistic password.
*24 : Executing Format Flash ROM displays the total number of replacement retained in
* Not
the CU FW of the device.
"Consumable replacement information (toner/drum/belt/fuser)" in a print statistic
report shows a calculation result of the formula "actual PU replacement - CU
display difference = replacement information."
Format Flash ROM clears the value of "CU display difference."
9. APPENDIX
* Not
* Not
9-7