Oki MC362w Maintenance Manual page 180

Oki Data CONFIDENTIAL
• If you want to specify the PU serial number, please add a "0" (a
normal-width zero) then input the 11-digit number. (Please notice
that when read out, the number will be 10 digits.)
As shown in the following image, on the menu of [PU serial
number setting], eliminate the 2-digit revision number then add a
normal-width zero to the 10-digit number and input it.
Ser.NO. 4AEL4011702K
Lot.NO. AE47027880 A0
Made in Thailand
Configured in UK
Add one-byte 0 to the top of 10-digit figure of Lot.NO.
Set "0AE47027880" in the setting screen.
Figure of Serial No. label image (labeled in UK Factory)
• PU serial number will be output to the Printer Serial Number
column in the header of Status Page. For this reason, check of PU
serial number is performed by printing
Status Page.
• After the configuration in the UK factory, when facing OEL, the
PU serial number is taken as Lot Number and shown in the Lot
Number: column of the last line which is in the header of the
Status Page.
(1-2) Set the CU serial number
SAP serial number can be applied to the device. The SAP serial
number is displayed in the highest rung of the serial number label. It
is a 12-digit number including production place (2 digits), production
year (2 digits), sequence number (6 digits) and revision number (2
digits).
• CU serial number is given an original number which is within 12
digits in the UK factory.
• Please notice that if you set the CU serial number, the menu
setting in CU will be reset (back to the default setting). (For
reference, Maintenance utility operation manual)
44952001TH Rev.2
Revision
• On the menu of [Section 2.4.1.1.4.3, Serial number information
setting] of [Section 2.4.1.1.4 CU circuit board setting function],
set the [Choose printer serial number] to [CU serial number] and
[Output mode] to [Show both].
• If you want to specify the CU serial number, please input the
12-digit number. (When read out, it will be 12 digits, too.)
Input 12 digits for Ser. NO. Input "4AEL4011702K".
Ser.NO. 4AEL4011702K
Lot.NO. AE47027880 A0
Made in Thailand
Configured in UK
Figure of Serial No. label image (labeled in UK Factory)
• CU serial number is shown in the Printer Serial Number Column in
the header of Status Page. Therefore, the confirmation of the CU
serial number after the change can be done by printing the Status
Page.
• The PU serial number is shown in the Lot Number: column of the
last line which is in the header of the MenuMap.
5. MAINTENANCE MENUS
5-33