Oki MC362w Maintenance Manual page 222

Oki Data CONFIDENTIAL
PJL Status
No.
Category
Code
20 Error 40054 1 Paper Jam: 372
2 Please open the scanner unit and
the top cover.
3
4
5 Please see Help for details.
21 Error 40997 (Y) 1 Please install new Image Drum
40998 (M) Unit.
40999 (C) 2
40996 (K) 3
4
5 Please see Help for details.
22 Error 40937 (Y) 1 Please install new Image Drum
40938 (M) Unit.
40939 (C) 2
40936 (K) 3
4
5 Please see Help for details.
23 Error 40971 1 Please change Fuser Unit.: 354
2
3
4
5 Please see Help for details.
44952001TH Rev.2
Error Warning Description
Jam has occurred nearby
DUPLEX unit.
Error 372 :
Misfeed from Duplex
The life of the image drum
(Alarm)
Error 350 : Y
Error 351 : M
Error 352 : C
Error 353 : K
Warning status takes
effect at Cover Open/
Close.
The toner empty error is
occurred after the image
drum reached its life.
Error 560 : Y
Error 561 : M
Error 562 : C
Error 563 : K
This is displayed until
a user exchanges the
image drum.
Notifies the fuser has
reached its life. This is
the error displayed based
on the counter to indicate
that the fuser has reached
its life, and printing will
stop.
Warning status takes
effect at Cover Open/
Close.
This error will occur on
some user setting mode.
%ERRCODE% specifies
3 digits error code.
PJL Status
No. Error Warning
Category
Code
24 Error 40970 1 Please change Belt Unit.: 355
2
3
4
5 Please see Help for details.
25 Error 40926 1 Please check Fuser Unit.: 348
2
3
4
5 Please see Help for details.
26 Error 40964 1 Please change Belt Unit.: 356
2
3
4
5 Please see Help for details.
7. TROUBLESHOOTING PROCEDURES
Description
Notifies the transfer belt
has reached its life. This
is the error displayed
based on the counter
to indicate that the belt
has reached its life, and
printing will stop.
Warning status takes
effect at Cover Open/
Close.
%ERRCODE% specifies
3 digits error code.
The engine detects the
fuser unit error.
It recovers, when a value
is able to be normally
read by re-reading after
cover closing. When not
recovering, exchange of a
fuser unit is needed.
%ERRCODE% specifies
3 digits error code.
Indicates waste toner
full. Warning status takes
effect only once at Cover
Open/Close, and the
error occurs again when
about 500 copies have
been printed.
%ERRCODE% specifies
3 digits error code.
7-30