Features - Siemens SITRANS F Series Operating Instructions Manual

Description

3.6 Features

3.6 Features
● The SITRANS FCT010 can be used as Modbus slave in stand-alone or parallel operation
on Modbus or third party automation systems
● Compact sensor design
● NAMUR conforming sensor built-in lengths (on request)
● High immunity against process noise
● Fast response to step changes in flow
● High update rate (100 Hz) on all process values
● Measurement of:
– Mass flow
– Volume flow
– Density
– Medium temperature
– Frame temperature
● Independent low flow cut-off settings for mass flow and volume flow
● Automatic zero point adjustment (initiated by host system)
● Process noise damping using digital signal processing (DSP).
● One totalizer for summation of mass flow. The totalizer is reset on loss of power.
● Empty tube monitoring
● Simulation of process values:
– Mass flow
– Volume flow
– Density
– Process media temperature
– Frame temperature
● Troubleshooting and sensor checking
● Use in hazardous areas according to specification
● Intelligent filtering system for aerated flow
● Unit selection of process values and totalizer
24
Operating Instructions, 01/2019, A5E44036384-AB
SITRANS FC310