Conformity With European Directives - Siemens SITRANS F Series Operating Instructions Manual

Further provisions for hazardous area applications are for example:
● IEC 60079-14 (international)
● EN 60079-14 (EU)
● For Korea only:
2.2.1

Conformity with European directives

The CE marking on the device symbolizes the conformity with the following European
directives:
Electromagnetic compatibili‐
ty EMC
2014/30/EU
Low voltage directive LVD
2014/35/EU
Atmosphère explosible
ATEX
2014/34/EU
Pressure equipment direc‐
tive PED
2014/68/EU
2011/65/EU RoHS
The applicable directives can be found in the EU declaration of conformity of the specific device.
Note
CE declaration
The CE declaration certificate is available on the SensorFlash SD card delivered with the
device.
See also
Certificates (http://www.siemens.com/processinstrumentation/certificates)
SITRANS FC310
Operating Instructions, 01/2019, A5E44036384-AB
Directive of the European Parliament and of the Council on the
harmonisation of the laws of the Member States relating to elec‐
tromagnetic compatibility
Directive of the European Parliament and of the Council on the
harmonisation of the laws of the Member States relating to the
making available on the market of electrical equipment designed
for use within certain voltage limits
Directive of the European Parliament and the Council on the har‐
monisation of the laws of the Member States relating to equip‐
ment and protective systems intended for use in potentially ex‐
plosive atmospheres
Directive of the European Parliament and of the Council on the
harmonisation of the laws of the Member States relating to the
making available on the market of pressure equipment
Directive of the European Parliament and the Council on the re‐
striction of the use of certain hazardous substances in electrical
and electronic equipment
Safety notes
2.2 Laws and directives
13