Adding A Device To Communication Network - Siemens SITRANS F Series Operating Instructions Manual

6.2.4

Adding a device to communication network

Before setting the parameters, it is necessary to configure the transmitter project in PDM.
1. Add the device to SIMATIC Modbus network:
– Select File → New
– Go to View and select Process Device Network view.
– Right-click on the typed in
– Right-click on Networks and Insert New Object → Communication Network.
– Click on Assign Device Type and select Modbus Network.
– Right-click Modbus Network and select Insert New Object → Object.
– Click on Assign Device Type, and select Devices → Modbus → Sensors → Flow → Coriolis
2. Set up the communication parameters for SIMATIC Modbus network:
– Select Networks → My computer, right-click on COM Port Interface and select Object
SITRANS FC310
Operating Instructions, 01/2019, A5E44036384-AB
Type in a project name, for example
Click OK two times. Your PC is now added to the Modbus Network.
→ SIEMENS AG → SITRANS FC
Click OK two times.
Figure 6-1 Assigning Modbus device to network
Properties.
6.2 Remote commissioning with PDM
FC commissioning .
Project name and select Insert New Object → Networks.
Commissioning
55