Adjusting The Length Of The Splitting Motion - Hakki Pilke Easy 42 Series Instructions For Assembly, Operation And Maintenance

20.17 Adjusting the length of the splitting motion

A. Open the guard of the valve mechanism behind the splitter:
The guard is hinged on the left brim and attached to the frame with two 13 mm bolts
(below the input conveyor's locking device). Remove the bolts and open the guard.
Figure 20.17a
You can adjust the initial position of the splitting bar, as well as the starting point of its
reversal motion, by adjusting the retainer bushing of the bar of the splitting motion guard
behind the machine.
Locking
To the left
Figure 2017b
B. Adjusting the bushings of the splitting motion guard
Left bushing::
Shifting to the left:
Returning the bar is moved to a later stage
Shifting to the right:
Returning the bar is advanced
Hakki Pilke 42 Easy
To the right
54 (97)
Slide rod
Right bushing:
Shifting to the left:
Returning halts sooner
Shifting to the right:
Returning halts later
Original
To the right
To the left
Version 4
Locking