Sharpening The Blade Chain; Maintenance Of The Flange - Hakki Pilke Easy 42 Series Instructions For Assembly, Operation And Maintenance

20.7 Sharpening the blade chain

When sharpening, avoid making the following mistakes:
The file is
too small
When filing, the
chain and flange
are in a 90 degree
angle

20.8 Maintenance of the flange

Carry out maintenance on the flange when necessary
Remove twists from
the flange with a flat
file
Hakki Pilke 42 Easy
45 (97)
The lowering
measure is too
big
Remember
correct
direction!
Clean the flange groove
and the lubricating oil
channel
Original
The
measure is too
small
the
filing
Keep the chain at the
correct operation
tightness so that the
flange does not wear
lowering
The correct
lowering
measure is
0.65 mm
Version 4