Cutting The Last Piece Of A Log; Re-Splitting Logs - Hakki Pilke Easy 42 Series Instructions For Assembly, Operation And Maintenance

37 (97)

16.3 Cutting the last piece of a log

WARNING! Before cutting the last piece of a log, you must make sure that the log
remains steadily on the input conveyor for the entire cutting duration.
If the last piece of a log is not large enough to make a whole piece of firewood, leave the
last full-sized piece on the input conveyor and the undersized part on the splitting groove.
Cut the log.
When the last piece is on the input conveyor, feed it to the splitting groove and start the
splitting mode with the foot switch.

16.4 Re-splitting logs

a. Lift the splitting groove guard up.
b. Place the log you want to re-split in the splitting groove.
c. Close the splitting groove guard.
d. Start the splitting mode with the foot switch.
Hakki Pilke 42 Easy Original Version 4