Start And Stop Buttons - Hakki Pilke Easy 42 Series Instructions For Assembly, Operation And Maintenance

Start and Stop buttons

4.1
Electrically-powered log splitter
Figure 420
Hakki Pilke 42 Easy
12 (97)
Power source: electricity
The Start/Stop buttons are located on the control
console, on the right side of the operating levers.
The green button is the Start button.
The red button is the Stop button.
Note! The button must be in the UP position
for the log splitter to start.
Turn the button slightly clockwise to lift it to the
UP position.
Use the red button (Figure 420) to stop the
log splitter.
Power source: tractor
A tractor-powered log splitter is started
and stopped from the tractor cabin.
For more information, refer to the operator's
manual of your tractor.
Original Version 4