Cutting Mode Measuring Device And Adjustment; Manual Measuring Device; Automatic Measuring Device - Hakki Pilke Easy 42 Series Instructions For Assembly, Operation And Maintenance

9 CUTTING MODE MEASURING DEVICE AND ADJUSTMENT

9.1 Manual measuring device

Figure 921
Choose the desired log length from the measuring tape and place the measuring device's
front edge to it by lifting the locking bolt and moving the measuring device either
forwards or backwards. Remember to replace the locking bolt and its pin.

9.2 Automatic measuring device

The log splitter can be equipped with an optional optical, freely adjustable measuring
device for cutting logs.
Device parts:
Reflecting
sticker and
tracing ray
transmitter
Hakki Pilke 42 Easy
Figure 922
26 (97)
Measurement adjustment
Free the transmitter from the adjustment
bar by unlocking the locking bolt.
Move the rear edge of the device to the
desired measurement.
Lock the device into place with the
locking bolt.
Figure 923
Original
Locking bolt. Remove
the bolt pin from
below to lift the bolt.
Log guide that guides
the cut log correctly
into the splitting
groove.
Version 4