Lifting The Output Conveyor Into The Transport And Storage Position - Hakki Pilke Easy 42 Series Instructions For Assembly, Operation And Maintenance

22 (97)
Figure 717
7.1.-7 Lift the output conveyor with the winch enough to see the extension joint and the
locking pin from underneath. Lock the latch of the joint with a ring pin or similar as shown
in the figure.
BE CAREFUL! NEVER GO UNDERNEATH THE CONVEYOR.

7.2 Lifting the output conveyor into the transport and storage position

To lift the output conveyor into the transport and storage position, perform the lowering
steps in reverse order.
Remember the following:
Figure 721
7.2-1 Raise the splitting guard before you lift the folded output conveyor into the transport
and storage position.
Hakki Pilke 42 Easy Original Version 4