Configure A Control Voltage Sequencer (Seq) - 1010music Toolbox v 1.1.4 User Manual

Parameter Description
Waveform Choose the desired wave
shape.
Depth The amount or amplitude
of the LFO.
Rate The frequency of the LFO
from about 0.1Hz to 12
Hz. When
Beat Sync
, this specifies the rate
On
in beats and measures.
Beat Controls the operation of
Sync
the rate parameter. When
this is ON, the wave cycle
is synchronized with the
clock.
3. Press HOME or touch the grid icon in the top left corner to return to the Main Screen.
Note:
If a value of an LFO parameter is changed during playback of the sequence, the change will take effect
•
immediately
Configure a Control Voltage Sequencer (SEQ )
The Control Voltage Sequencer (SEQ) cells allow you to create a control voltage pattern by
drawing a bar chart on the touch screen. This signal plays out through the output jack that
corresponds to this cell. The output range for this signal is 0V to +5V. The SEQ Cell Type can
only be used in cells in columns 3 and 4 because it requires a control voltage output. The SEQ
Cell Type does not create a MIDI signal. To configure an SEQ cell:
1. From the Main screen, touch one of the SEQ cells in a column aligned with the CV
Output jacks to display the CV Sequencer screen. To change a cell to an SEQ, touch
the Cell Type button to the right of the grid icon in the top row of the cell parameters
screen, and then touch
2. Press the INFO button to display the CV Sequencer Parameters screen.
3. Use the control knobs to adjust the values of the parameters:
Parameter Description
Step Len The length of each step in
the sequence
6/13/18 7:54 PM
Range of Values
Saw
•
Rev Saw
•
Triangle
•
Pos Tri
•
Square
•
Pos Square Sine
•
Pos Sine
•
Random
•
0 to 100%
0 to 100%
or
is
1/64, 1/32T, 1/32, 1/16T,
1/16, 1/8T, 1/8, 1/4T, ¼,
1/2T, ½, 1 bar, 2 bars
(T= Triplet)
On, Off
from the list of Cell Types.
SEQ
Range of Values
1/64, 1/32T, 1/32, 1/16T,
1/16, 1/8T, 1/8, 1/4T, ¼,
1/2T, ½, 1 bar, 2 bars, 4
bars, 8 bars
(T= Triplet)
Digital Heart – Analog Soul
Toolbox User Manual
Modulation
Target?
No
Figure 1 7: LFO P aramters
Yes
Yes
No
Figure 1 8: CV Sequencer
Modulation
Target?
Yes
Copyright 1010music LLC 2017
Screen
Screen
P. 19