Welcome - 1010music Toolbox v 1.1.4 User Manual

Welcome

Thank you for buying our toolbox. Every good craftsperson needs a toolbox that contains some standard tools that
help them do their work. We think Eurorack musicians need a toolbox for their craft as well. This toolbox contains
sequencers and function generators that provide CV and MIDI outputs for use in controlling other modules. You
can't create music with toolbox alone, but it certainly offers some tools to help you work with your other materials to
create the music you imagine.
In this manual, we will start by giving you an overview of the front panel hardware and the Main screen so you know
what you have to work with. After that, we will set up the module. Next we will quickly discuss basic preset usage and
muting capabilities. Then we will walk you through how to use each of the sequencers and function generators,
followed by a discussion of using modulators with the sequencers. Then we will cover how to synchronize toolbox
with other modules. Finally, we will go into more depth about preset management tasks and discuss how to upgrade
your firmware.
If you would rather get a quick overview of how to use the module, see the Toolbox Quick Start Guide that came with
the module and that is also available online at https://1010music.com/toolbox-documentation-software.
We use the following text formatting conventions in this document:
On Screen References:
Front Panel Hardware:
This document applies to version 1.1.4 of the toolbox firmware.
P. 4
6/13/18 7:54 PM
Used for text that refers to names of screens or on screen graphical
elements.
Used for text that refers to physical elements on the front panel of
the module, but not on the touchscreen.
Digital Heart – Analog Soul
Toolbox User Manual
Copyright 1010music LLC 2017