Table of Contents
Advertisement
To apply a modulator to a specific modulation target:
2.
From the Main screen, touch a cell that has modulation targets and press INFO to display the
corresponding parameters screen.
3.
Press the INFO button to display the parameters screen.
4.
The parameters which can be modulated will have three black boxes below them. This allows you to apply
up to three modulators to each of these parameters. Touch one of the boxes below a parameter to open
the
Modulation Selection Screen
5.
Adjust the modulation parameters by turning the Control Knob closest to the parameter.
Parameter
Description
Source
The source of modulation to be
applied.
Amount
Choose the amount of
modulation that will be applied.
6.
Once you have selected all the settings, touch the arrow (
or press HOME to go back to the parameters screen.
7.
Touch another black box below a parameter to add more modulation.
8.
Press HOME to return to the Main screen.
6/13/18 7:54 PM
.
Range of Values
• None
• SEQ2
• LFO1
• SEQ3
• LFO2
• SEQ4
• LFO3
• EXT1
• LFO4
• EXT2
• SEQ1
• EXT3
-100% to +100%
) in the top left
<-
Digital Heart – Analog Soul
Toolbox User Manual
Figure 2 5: Mo dulation
Selection Screen for a
NO TE Cell
P. 27
Copyright 1010music LLC 2017
Advertisement
Table of Contents
