Table of Contents
Advertisement
Name
Description
Control
A CREC cell is used to record incoming CV
Voltage
signals from the CV1 and CV2 input below
Recording
the Clock input. After the recording is
(CREC)
completed, the Cell Type automatically
changes to CPLY. A CREC can also load a
WAV file for playback by a CPLY cell.
Control
Plays back a control voltage signal that was
Voltage
recorded via CREC. Can be used together
Playback
with OUT cells to play back up to 8 channels
(CPLY)
from a loaded WAV file, or 2 channels from a
WAV recorded on the module via CREC.
Control
Use this type together with a CPLY cell to
Voltage
play back an additional channel from the
Output
WAV file loaded in the CPLY cell.
(OUT)
The use of cell types in different columns is constrained based on the mapping of the cells to the output jacks below
them. Gate Output jacks 1 through 8 can only output Gate signals. They are not designed to support output of
control voltage signals. CV Output jacks 1 through 8 support control voltage signals, which cannot be used as gate
signals. Therefore, the cell columns aligned with Gate Output jacks can only support GATE and NOTE cell types.
When the NOTE cell type is used in columns aligned with Gate Output jacks, it outputs a full MIDI signal, but the
output jacks are limited to only output a gate signal; no CV pitch signal is available. Cells in columns aligned with CV
Output jacks can support all cell types. However, a NOTE cell type in one of these columns, while outputting full
MIDI signals, will only generate a CV Pitch signal; no Gate information will be generated through the CV Output
jacks. NOTE cells can also be created that span across Gate and CV jacks in order to generate both GATE and CV
pitch signals for the sequence.
Note:
Only the GATE and NOTE cell types support MIDI outputs.
•
To select a Cell Type:
1.
Press the HOME button if needed to return to the Main Screen.
2.
Touch one of the cells aligned with the CV Output or Gate Output jacks to select the cell. The selected cell
will be highlighted in pink.
3.
Press the INFO button to display the parameters screen for the selected cell.
4.
Touch the Cell Type button in the top row just to the right of the Grid icon and select the desired Cell Type.
The Cell Type button label changes to display the currently selected Cell Type. Note that you may choose a
Cell Type of (none) in Gate Output columns to clear the cell. This option is not available in the other
columns.
Note:
If you have a NOTE cell that spans columns 3 and 4, you can split it into two cells of any other cell type. Simply
•
select the NOTE cell, and then change it's cell type. The NOTE cell will split into two cells, with the cell in the CV
column using the Cell Type selected. The cell in the Gate column will be empty.
You are now ready to configure the selected sequencer or function generator.
6/13/18 7:54 PM
Gate 1-8
Not Supported
Not Supported
Not Supported
Digital Heart – Analog Soul
Toolbox User Manual
Gate 5-8 and
CV 1-8
CV 1-4 Span
Not Supported
CV
Not Supported
CV
Not Supported
CV
Copyright 1010music LLC 2017
P. 13
Advertisement
Table of Contents
