Table of Contents
Advertisement
When a NOTE cell is aligned with only a Gate Output jack, only a Gate signal will be provided in the corresponding
output jack. When it is aligned with only a CV Output jack, only a Control Voltage output for pitch will be provided in
the corresponding output jack.
No matter which column a NOTE cell is placed in, it will always support MIDI output to the selected port and
channel.
The table below summarizes the output jack support available based on the Output Jack or Jacks aligned with the
column where the NOTE cell is placed.
Name
Description
Note
A piano roll style sequence of notes
Sequencer
displayed with the keyboard running down
(NOTE)
the left side, and the sequence steps
scrolling from left to right. The Gate output is
high when a note is playing, and low when it
is not. The CV output varies based on the
pitch of the selected note.
The MIDI signals are output through the MIDI Output Jacks on the right edge of the module. The Note Sequencer
parameters allow you to configure the MIDI port and channel for playback of each Note Sequencer. All Note
Sequencers could output to the same port and channel, or each could be routed to a different port or channel. The
MIDI output is polyphonic and can play up to 128 notes per step per port. When the sequence is recorded via MIDI
input, or loaded from a MIDI file, the MIDI output will include gate, pitch and velocity information. Notes that are
placed manually via the touchscreen will include only gate and pitch information in the MIDI output. The Note and
Gate Sequencers are the only Cell Types that send a signal to the MIDI output.
Follow these steps to create a Note Sequence:
1.
From the Main screen, touch one of the Note Sequencers to display the Note
Sequencer screen. To change the type of a cell to NOTE, touch the Cell Type
button in the top row just to the right of the Grid icon and select
and white display along the left side of the screen represents notes on a keyboard,
with higher pitched notes at the top of the screen. The vertical gray bars represent
steps in the sequence. Blue rectangles represent notes in the sequence. MIDI
output can support multiple notes per step, but CV output only supports one note
per step.
2.
There are three ways to add notes to the sequence:
a.
Touch the screen at the step and note position desired.
b.
Touch Rec to record inputs coming in through the MIDI Input Jack in real
time. Touch Rec again to stop recording.
c.
Touch Step to record inputs coming in through the MIDI Input Jack with each successive MIDI
input note adding a note to the next step in the sequence. Touch Step again to stop recording.
3.
You can use the Control Knobs and touch gestures to adjust notes and to zoom and scroll through the
sequencer:
Action
Turn the top left control knob
Turn the top right control knob
Turn the bottom left control knob
Turn the bottom right control knob
P. 16
6/13/18 7:54 PM
Gate 1-8
MIDI and Gate
NOTE
Result
Cycles the note selection through the notes on the piano
roll
Change the length of the currently selected note
Moves the position of the step cursor
Moves the currently selected note up or down through
the piano scale
Digital Heart – Analog Soul
Toolbox User Manual
Gate 5-8 and
CV 1-8
CV 1-4 Span
MIDI,
MIDI and CV
Gate and CV
. The black
Figure 1 4: Note
Sequencer Sc reen
Copyright 1010music LLC 2017
Advertisement
Table of Contents
