Moving The Appliance; Electrical Or Electronic Product At End Of Service Life; Problems And Corrective Actions - Rowenta Automatic ES6930 Manual

Table of Contents

Advertisement

MOVING THE APPLIANCE

Keep the packing and use it again to move the appliance.
If the unpacked appliance is dropped, it is advisable to take it back to an authorized service centre
to avoid any risk of fire or electrical problems.

ELECTRICAL OR ELECTRONIC PRODUCT AT END OF SERVICE LIFE

Let's all help protect the environment !
Your appliance contains many recyclable materials that can be recovered or recycled.
Leave it at a local civic waste collection point.
HELPLINE
If you have any product problems or queries, please contact our Customer Relations Team first for expert help
and advice:
0845 602 1454 - UK
(01) 677 4003 - ROI
or consult our website - www.rowenta.co.uk

PROBLEMS AND CORRECTIVE ACTIONS

The appliance does not switch on
when the "On/Off" is pressed.
Water or steam comes incorrectly
out of the steam nozzle.
The espresso or coffee is not hot
enough.
The coffee is too light or not strong
enough.
The coffee flows too slowly.
The coffee is not creamy enough.
The appliance does not serve any
coffee.
You have used ground coffee
instead of coffee beans.
The grinder makes a strange noise.
Check that the plug of the power cord is pushed correctly
into the mains socket.
In case of repeated operation, several drops may drip
from the steam nozzle.
Change the coffee temperature setting.
Heat the cups by rinsing them with hot water.
Check that the coffee bean tank has coffee in it and that it
is flowing correctly.
Avoid using oily, caramelised or flavoured coffee.
Reduce the volume of coffee using the central knob.
Turn the grinding fineness knob towards the left for a finer
grind.
Prepare in two cycles using the 2 cup function.
Turn the grinding fineness knob towards the right for a
coarser grind (may depend on the type of coffee used).
Carry out one or two rinsing cycles.
Turn the grinding fineness knob towards the left for a finer
grind (may depend on the type of coffee used).
Change the Claris Aqua Filter System cartridge (follow the
installation procedure on page 3).
Carry out one or two rinsing cycles.
An incident has been detected during the preparation. The
appliance resets itself automatically and is then ready for
a new cycle.
Use your vacuum cleaner to suck out the pre-ground
coffee in the coffee bean tank.
There are foreign particles in the grinder.
Contact ROWENTA Customer Service.
15
GB

Advertisement

Table of Contents
loading

This manual is also suitable for:

Automatic es6930pnAutomatic es6930pe

Table of Contents